How to use a new woodworking tool without hurting yourself?

How to use a new woodworking tool 1

So, you’ve decided you are interested in woodworking, but you have no experience. Getting started might seem a bit daunting with a new woodworking tool. Yet, you have to determine the different types of wood or tools for woodworking to use, figure out the new woodworking tools you will need, what it will all cost you, and more.

So much more, we dare say you’ll never stop learning. However, despite all that there is to learn, woodworking isn’t a particularly difficult skill. Once you master the basics, it only gets easier from there.

Wood working
Image Source: Home Improvement & Power Tools | Black Friday 2021

Also, don’t think you have to spend thousands of dollars on getting the best woodworking tools. In many cases, basic woodworking skills will save you time and money, and you’ll find out that you won’t need certain tools at all. This means that the dream project you’ve always wanted to start is likely well within your reach.

However, before you get started, there are a few safety rules. All woodworkers should know how to use a new woodworking tool without hurting themselves, especially if they intend to use common woodworking hand tools and power tools.

These machines can be sharp and may cause serious injury if you don’t take the proper precautions. By following basic safety guidelines, you can significantly reduce your risk of harm. So, let’s check out!

Only Use Woodworking Machines You’ve Been Trained To Use.

It seems like we are stating the obvious here, but you’d be surprised how many folks attempt to use a new woodworking tool they’ve never touched before and learn a very painful lesson in the process. Only use woodworking tools you have training and experience in using because safety is more important than experimentation.

Woodworking Safety
Image Source: Handyman tips

Understand The Instructions For What You Are Doing Before Attempting To Use Tools

In other words, take your time and consider what you are doing and how you plan to do it. Because you are using power tools, it is dangerous to attempt something without a proper understanding of the process.

Always Wear Safety Equipment

Though it should go without saying, always wear proper safety equipment. This is one of the most important rules of using a new woodworking tool. You should always, always be wearing your safety glasses. Never be without them while using used woodworking tools or in a woodworking shop.

Always Wear Safety Equipment
Image Source: DIY Candy

Put them on when you arrive, and don’t take them off until you leave, or you risk endangering your eyesight. Other safety gear like hear protection may be needed if using noisy tools such as surface planers and routers. If you are applying finishes, then latex gloves would be appropriate. No matter what other gear is required for your project, safety glasses are non-negotiable.

Always Wear Appropriate Clothing

Never wear loose-fitting clothes while using a new woodworking tool because you run the risk of dangling fabric getting caught in a blade head or saw blade. You should wear comfortable clothing that will still protect you from flying wood chips. Before woodworking, you should also remove all jewelry, especially dangling jewelry like necklaces, earrings, and bracelets.

Clothing for carpenter
Image Source: MEWA service

Avoid Drugs and Alcohol

It is vital to stay sober when using power tools and avoid all substances that cause intoxication when woodworking. If you are even mildly intoxicated, stay out of the woodshop. If you don’t, you’re only inviting danger and risking your safety as well as the safety of others.

Avoid Drugs and Alcohol
Image Source: Baton Rouge Behavioral Hospital

Disconnect Power Before Any Blade Changes

Sometimes, you may need to change a bit or blade. When you do, make sure you disconnect the power tool from its electrical source before you attempt to change the blade. This rule is simple but essential. You could lose your fingers or worse by skipping this. Merely turning the switch off is not adequate because the switch could malfunction or get bumped. Do something to remind yourself, like attaching a wrench to the power cord. Whatever it takes, just don’t forget to disconnect the power.

Try Using One Extension Cord

This can help train you to remember to disconnect from your power source when making blade changes. Use one heavy-duty extension cord for all of your 110-volt power tools. This makes you switch the cord between tools with each use so that you are forced to remember to plug and unplug from your power source.

Try Using One Extension Cord
Image Source: Rainbow International

Use Sharp Blades and Tools

This might seem like common sense, but make sure your blades and hard woodworking tools are sharp. When a blade or tool is dull, it’s dangerous, and you will have to work harder to achieve your desired results. Plus, when you have to work harder, you will likely experience kickback, or the new woodworking tool will bind. Sharp and essential woodworking tools are kept free of the pitch to make cleaner cuts and are simply safer.

Check Materials for Nails and Other Metal

Rapidly spinning saw blades that connect with nails or other metals such as staples or screws can damage both your machinery and the stock, as well as cause kickback, and contribute to injury. So always check your stock for metal, or even better, use a metal detector.

Check Materials for Nails and Other Metal
Image Source: The Spruce

Always Work Against the Cutter

When using a new woodworking tool with power, the saw blade or router bit should always cut against the wood, not with the wood—these must-have woodworking tools ensure your work without hurting yourself while working with a new woodworking tool.

Avoid Reaching Over the Blade

This is important when using woodworking hand tools as a miter saw, or table saw. Just because a blade isn’t moving, the switch can be bumped or malfunction if it is still plugged into a power source. So never reach over a blade to remove waste, and never go near a moving blade. Thus, you must know about the essential woodworking tools.

Avoid Reaching Over the Blade
Image Source: DrawingTheHouse.com

Avoid Distractions

Distractions are common, but safety dictates you never divert your attention away from used woodworking tools when you’re in the middle of using them. Complete the cut you are making, and switch your tool off before addressing any interruptions.

Avoid Awkward Hand Positioning or Grip

Sudden slips can send your hand straight into the blade when you use awkward grips and hand positions. It is important to acknowledge while using a new woodworking tool.

woodworking hand grip
Image Source: Ronix Tools

Avoid Removing Sawdust or Cuttings by Hand

Always remove cuttings and sawdust after your machine has stopped moving. However, never remove them by hand. Use a stick or a brush. Also, make sure the vintage woodworking tools are disconnected from their’s power source.

Removing Sawdust
Image Source: ResearchGate

The most common damage in the workshop is from items laid on top of materials. Hammers, saws, and files can all dent or scratch wood destined to be the focal point of a new project. Hopefully, you’ll learn from our example and avoid this behavior completely.

Woodworking is a valuable skill and art form that can bring you a ton of enjoyment when you take the time to learn the basics. However, you must use common sense and pay attention to basic rules for your safety as well as the safety of others.

Leave a Reply

Your email address will not be published. Required fields are marked *